Why Do Reolink Argus 2E Cameras Keep Failing – The Ultimate Guide of 2024!
Reolink Argus 2E cameras often fail due to weak Wi-Fi signals, battery issues, outdated firmware, improper installation, and environmental factors.
In this article, we will explore why Reolink Argus 2E Cameras Keep Failing and provide solutions to help you get your camera back on track.
Weak Wi-Fi Signal:
A weak or unstable Wi-Fi connection is one of the primary reasons for camera failures. The Reolink Argus 2E Camera relies on a robust internet connection for streaming and recording. If your camera is too far from the router or there are physical obstructions like walls and furniture.
Despite its many advantages, the Reolink Argus 2E camera may encounter various issues affecting its performance. Understanding these common reasons can help you troubleshoot and resolve any problems effectively.
The signal may weaken, leading to disconnections and performance issues. Below are some of the most frequent causes Why Do Reolink Argus 2E Cameras Keep Failing:
How to Check Wi-Fi Strength:
- Use a Smartphone or Laptop: Connect your device to the same Wi-Fi network as the camera. Walk around the camera’s location while observing the signal strength indicator on your device.
- Reolink App Monitoring: The Reolink app also provides information about the connection status and signal strength, allowing you to assess the camera’s connectivity.
Solution:
- Relocate Your Router: If possible, place your router closer to the camera.
- Use a Wi-Fi Extender: Consider investing in a Wi-Fi range extender to boost the signal strength in areas of your home where the Wi-Fi is weak.
- Reduce Interference: Keep the camera away from devices that may interfere with Wi-Fi signals, such as microwaves or cordless phones.
Battery Issues:
Another reason Why Do Reolink Argus 2E Cameras Keep Failing is battery-related problems. The camera operates on a rechargeable battery, which can lead to issues if not properly maintained. If the battery is old or not charged correctly, it can cause shutdowns or poor performance.
Symptoms of Battery Problems:
- Frequent Disconnections: The camera may disconnect from the Wi-Fi network or shut down unexpectedly, leading to missed recordings or alerts.
- Poor Performance: You may notice a significant drop in video quality, such as pixelation or lagging, or experience interruptions in streaming when the battery is low.
Also read: Why I’m interested In An Old Camera short Answer – A Quick Overview!
Solution:
- Regularly Check Battery Status: Use the Reolink app to monitor the battery level. If it falls below a certain percentage, charge it immediately.
- Battery Replacement: If you notice that the battery doesn’t hold a charge or drains quickly, consider replacing it with a new one.
Software and Firmware Glitches:
Outdated firmware can cause performance issues, including camera failures. Firmware updates often include bug fixes, new features, and improvements that can enhance your camera’s functionality.
How to Update Firmware:
- Use the Reolink App: Check for firmware updates through the Reolink app. The app typically notifies you when an update is available.
Solution:
- Keep Firmware Updated: Regularly check for updates and install them promptly to ensure your camera is running smoothly.
- Reset the Camera: If you experience persistent issues even after updating, try resetting the camera to its factory settings and setting it up again.
Improper Installation:
The way the camera is installed can significantly impact its performance. If the camera is not mounted securely or placed in an inappropriate location, it may become damaged or fail to function correctly.
Best Practices for Installation:
- Adjust Camera Angle: Ensure that the camera is aimed at key entry points, such as doors and driveways, while avoiding obstructions like trees, walls, or furniture that could block the view.
Solution:
- Follow Installation Guidelines: Adhere to the user manual’s instructions for installation, ensuring the camera is mounted securely and in an optimal location.
- Conduct Regular Inspections: Periodically check the camera’s installation to ensure it remains secure and correctly positioned.
Also read: How To Upload Deleted Pictures From A Coolpix S31000 Camera – Complete Guide!
Environmental Factors:
Outdoor cameras like the Reolink Argus 2E can be susceptible to environmental factors. Extreme weather conditions such as excessive heat, cold, or humidity can impact their functionality.
Weather Resistance:
- Extreme Temperatures: High temperatures can cause the camera to overheat, potentially leading to shutdowns or degraded video quality.
- Rain and Snow: Direct exposure to rain or snow can lead to water damage, affecting internal components and overall functionality.
Solution:
- Choose the Right Location: Install the camera in a sheltered area to protect it from direct exposure to rain, snow, or extreme temperatures.
- Use Weatherproofing Accessories: Consider using additional protective accessories, like a sun shield or rain cover, to enhance durability.
Storage and User Issues:
Storage and user-related issues can significantly impact the performance and functionality of your Reolink Argus 2E camera.
Below are common storage challenges and user errors that can lead to camera failures, along with practical solutions.
Storage Issues:
Storage and user errors are further causes Why Do Reolink Argus 2E Cameras Keep Failing. Using incompatible SD cards or failing to update settings can lead to performance issues.
Common Storage Problems:
- SD Card Compatibility: Not all SD cards are suitable for the Reolink Argus 2E. Using an incompatible or low-quality SD card can lead to recording failures or data corruption.
- Formatting Problems: If the SD card is not formatted correctly, it can prevent the camera from saving footage, causing interruptions in recording.
Solution:
- Regularly Clear Storage: Check and delete unnecessary recordings from the SD card to free up space.
- Use a Quality SD Card: Ensure you’re using a compatible and high-quality SD card. Reolink recommends specific brands and capacities for optimal performance.
Also related: Can I Have My Camera Off On Flingster – A Complete Privacy Guide!
User Error:
Sometimes, user error can contribute to camera failures. This can include misconfigurations in settings or not utilising the camera’s features properly.
Common User Errors:
- Incorrect Settings: Misconfigured camera settings, such as resolution, motion detection sensitivity, or alert preferences, can impact performance and lead to missed recordings or alerts.
- Failure to Update Firmware: Neglecting to update the camera’s firmware can leave it vulnerable to bugs and performance issues. Regular updates often include important fixes and improvements.
Solution:
- Review Settings: Periodically review the camera settings in the Reolink app to ensure they align with your preferences and needs.
- Utilise Customer Support: If unsure about any settings or features, consult the user manual or reach out to Reolink’s customer support for guidance.
FAQ’s
What causes Reolink Argus 2E cameras to fail?
Common causes include weak Wi-Fi signals, battery problems, outdated firmware, improper installation, and environmental factors.
How can I check my Wi-Fi signal strength for the camera?
Use a smartphone or laptop to test the signal strength at the camera’s location or check the connection status via the Reolink app.
What should I do if the Reolink Argus 2E camera battery is not holding a charge?
Regularly check the battery status in the Reolink app and consider replacing the battery if it drains quickly or fails to hold a charge.
How can I keep my Reolink Argus camera’s firmware updated?
Check for firmware updates through the Reolink app, which will notify you when updates are available.
What are the best practices for installing the Reolink Argus 2E?
Install the camera at a height that minimizes tampering, adjust the angle for clear coverage, and follow the installation guidelines in the user manual.
Conclusion
If your Reolink Argus 2E camera keeps failing, it can be frustrating. However, understanding the common reasons for these issues can help you troubleshoot and find solutions. By ensuring a strong Wi-Fi connection, maintaining the battery, updating software, and installing the camera properly, you can improve the reliability of your security system.
